A patchy melt is almost never the cheese’s fault. This page gives the handling steps that produce an even, continuous cheese layer using Dairy Technologies Corporation (DairyTech) melting cheese, based on the application instructions issued with every product code.
How do you get an even cheese melt?
Three steps. Spread the cheese, then cluster the shreds so they touch each other. Bring Kesorap Pizza Cheese to ambient temperature before baking. Bake on a preheated oven at 250 deg C. Cheese that melts as one continuous layer needs contact between shreds; scattered shreds melt as isolated strands and the surface looks uncovered. Confirm your bake: irenellem@dairytechnologiescorp.com.
- Spread, then cluster the shreds so they touch
- Bring Kesorap Pizza Cheese to ambient temperature before baking
- Preheated oven at 250 deg C
- Contact between shreds is what creates a continuous layer
How long does each DairyTech melting cheese take?
Premium Melting Cheese (MC03) melts in under 3 minutes in a preheated oven. Kesorap Pizza Cheese (KPC20), Kesorap Express Melt (EM0140) and FS Melting Cheese (PC-18) melt in under 4 minutes at 250 deg C. Time from the point the cheese enters the oven, not from when you start preheating. Ask for the sheet: irenellem@dairytechnologiescorp.com.
- MC03 — under 3 minutes, preheated oven
- KPC20 — under 4 minutes at 250 deg C
- EM0140 — under 4 minutes at 250 deg C
- PC-18 — under 4 minutes at 250 deg C
Why does my cheese burn before it melts?
Usually too much heat for too long, or the cheese placed cold on a hot surface. MC03 is a very soft cheese with a good melt and needs only under 3 minutes. For the others, hold at 250 deg C and cluster the shreds first so the layer melts through before the surface scorches. Check your oven calibration: irenellem@dairytechnologiescorp.com.
- Excess heat or excessive time burns the surface
- Cheese placed cold can scorch before it flows
- MC03 needs only under 3 minutes
- Verify your oven actually holds 250 deg C
Does melting cheese need to be frozen before use?
Only Premium Melting Cheese, MC03. Freeze it a minimum of 12 hours before use so it shreds and handles properly. KPC20, EM0140 and PC-18 are shreddable in chilled condition and need no freezing. Never freeze finished product for storage; freezing is a handling step, not a storage method. Confirm with us: irenellem@dairytechnologiescorp.com.
- MC03 — freeze 12 hours minimum before use
- KPC20, EM0140, PC-18 — no freezing required
- Shred in chilled condition
- Never freeze finished product for storage
Request a sample, specification sheet or quotation
Send your requirement, monthly volume and delivery area to irenellem@dairytechnologiescorp.com, or use the Dairy Technologies Corporation contact page. Full product and specification reference: DairyTech processed cheese supply. Related: Melting cheese for pizza and baked pasta · Filled cheese versus melting cheese · Cheese Storage, Shelf Life and Transport Requirements — Philippines.